Whether your concrete project is for landscaping, building a deck or remodeling your home, poor installation can cause serious problems that are costly to repair. It is important to have the right mix of concrete, avoid pouring concrete during extreme weather and correcting finish the surface of the concrete to avoid the cracking, flaking and deteriorating problems that are associated with amateur concrete installations:
1. Getting the Right Formula to Ensure Your Concrete Has Strength
It may seem like concrete is an easy formula; Portland cement, aggregate material and add water. Modern concrete is more complicated and may have additives for pouring in cold weather, heat or for the climate in your area, as well as things like fiber materials to add strength. It may also have different colors of aggregate and special chemicals to give it a custom finish on the surface. Therefore, it is best to get a professional concrete mixture from a ready-mix concrete service to ensure you have the perfect concrete recipe for your DIY project.
2. Preventing Cracking with The Correct Structural Elements For DIY Concrete
For applications like setting fence posts, there is really no need to add structural reinforcement to your concrete, but almost all other applications will need it. If you are doing retaining walls or structural support for foundations, you need to use steel bars to reinforce the concrete and give it extra strength. This makes that concrete stronger and prevents cracking. For reinforcement of pavements, you will need to use textile or steel mesh in different applications; fiber mesh can be used in concrete without structural loads, such as for a patio or sidewalks, and steel mesh is needed for pavements that need to provide structural support for loads, such as with driveways.
3. Correctly Finishing Concrete to Prevent Weak Spots and Surface Flaking
These are some tips that will help you avoid that serious problem associated with DIY concrete installations. If you need concrete, contact a ready-mix concrete service to ensure you have the perfect formula for concrete that will not give you problems after it cures. When finishing concrete, you want to use a vibrator to remove air pockets from the mixture as it is being poured, this is important to prevent weak spots and to get a perfect finish. Finish the concrete in phases as it cures. First, level the surface while the mixture is still in a liquid stay. As the concrete hardens, smooth the surface with special concrete trowels, and finally, use water and a finishing machine to get the finish as smooth as possible once it has mostly hardened. Let the concrete cure before doing custom finishes like acid staining.
These are some tips that will help you avoid the most common problems with DIY concrete projects. If you need concrete for a project you are planning to do, contact a ready-mix concrete service to get all the materials and advice you need before you begin.